UW Whitewater Theatre/Dance Department

Further work on the summer shows! Much of the construction is done — though the flippy panels will need to be installed — and emphasis has shifted to painting for a while.

Here’s my continuing project, the tracery for “Poe x2” act on:

Meanwhile, Alex and Nathan re-establish the boundaries of the painted sections of the stage floor. . .

. . . so Alex can lay in a base coat before painting the borders to match the facing.

Shelby seals the nosing:

And Lilliana traces out the painting that will adorn the stage right panel:

Work continues on the Summeround shows!

I finished two of the tracery panels for the first act of “Poe Xs” yesterday. Here’s one of them:

And this morning finished basing the prison panels for the second act of Poe:

The interior frames for the flippy panels are all done:

So, the exposed sides needed to get painted before they got installed. Here’s Nathan, glaring balefully at the camera:

And TD Katie with Alex:

They also started pulling lighting units from the Barnett Theatre. Some units need to stay in the air for Theatre Camp, so Alex made some quick notes on the stage floor to help them remember what needed to remain:

The construction of the flippy panels is in full swing, and I’ve started painting the central set for the first half of “Poe Xs 2.” First though, here’s a pic of the deck, sealed:

And the facing, sealed:

Base color of the central panels:

Since the walls will have painted inset panels and tracery, one of my projects this morning was to create a stencil for the tracery:

And then shade in the appropriate sections so we have a guide once we move to the actual painting:

And here is the intrepid team assembling the framework for the panels. Summer TD Katie working with Nathan on one of the 4′ wide ones:

Lilliana and Nathan discussing a drawing. Or life. Perhaps Beyonce.

Alex enjoys using the drill press:

And of course, happy technicians make for a happy shop. . .

Construction has begun on this summer’s shows — both “Poe Xs 2” and “Rounding Third” will use the same platform arrangement, and rotating walls will have replaceable panels for each show. Something very new this summer is the all student tech staff, including student technical director. Katie has been leading the others in getting things built, and here’s a photo of the platforming in place from the middle of last week:

As I await finals and senior project meetings, I’m drafting the shows for Summeround. Since we’re using the same platform arrangement for both, and budgets are small, it’s relatively straightforward. We also have a student TD this summer, and this is the first show she’ll be flying solo on — so not damaging her is also a priority.

First, an image of the “Black Cat” half of “Poe Xs 2.” Same rotating flats, different imagery, this time of a prison cell:

A photo from yesterday as I laid out the groundplan. Since the models were built in Sketchup in a rather fudgy fashion, I’m tightening up measurements as I draft. I will likely rebuild the set in Sketchup more accurately so the TD has a true 3D version for reference as well.

The elevation and section are also done, so it’s time for detail plates. Here is the decking, nearing completion:

Finally, I like to figure out how to build some things before I draft them. I will be talking to our academic TD about the rotating panels before I draft them for the student TD, but here’s what I think would work:

“Animal Farm” has opened and closed, and we’re heading into the final days of the semester. Production work doesn’t stop though — this week saw the presentation of the Directing I scenes in the Hicklin, and Friday night will feature the Emerging Choreographer’s Concert in the Barnett.

We’ve started moving not just on the two summer shows, but production meetings are scheduled for the first Fall show (“Toil and Trouble”), and student designers have been given their timelines and deadlines so that they don’t panic the day after Labor Day when we both return to class and start building the set.

Here are the preliminary Sketchup renderings of the two summer shows. First, “Rounding Third,” since we had a meeting about that show yesterday:

Since we have a small budget for the summer as well as a first time student TD, I’ve chosen to go with a rep arrangement of platforming and pivot walls that can accommodate simple scenic environments for both plays. Here’s the first half of “Poe Xs 2:”

We have our Poe meeting tomorrow, but the director likes what she’s seen so far.

The students, of course, have been working their tails off as well. In the advanced design seminar, two students chose to develop their rendering skills by analyzing and painting various fabric textures. Here’s Lilliana’s:

And some of Allison’s:

Lilliana is also at work on a scenic painting project:

Finally, our TD (Ruth) has been feverishly putting together a comprehensive production calendar for next year. Here it is, pinned to the board outside her office for all to see and refer to:

When you put the whole thing on a piece of paper and color code it, well, it sure reinforces the fact that we do quite a bit here!

Final Dress of “Animal Farm” was last night. Adaptation of the George Orwell novel by Ian Woolridge. Directed by Angela Iannone, scenic design by Eric Appleton, costume design by Marshall Anderson, lighting design by student Quinn Bauer, props management by students Andrew Walsh and Ben Treinen, sound design by student Costandi Kuttab, stage managed by student Brianna Cullen.

Here are some photos. There’s a lot of constant movement in this show that my little camera can’t handle at lower light levels, so please excuse the blurriness in some of these images.

The set under worklights:

The “Manor Farm” sign was a late addition. I’ll be toning it down this afternoon.

Old Major addresses the animals:

The expulsion of Snowball:

The completion of the windmill:

Teaching the young animals:

Pilkington vists the pigs:

We’ve begun tech for “Animal Farm!” Here are some photos from the last few days.

Here’s Nathan painting blackboard chalk onto planks. The commandments will be written on these.

And here are students hanging burlap over the finished chalkboard. We’re using rare earth magnets!

The content of the pit has loomed large from the start. We aimed for a pond filled with brown water (made brown with non-toxic children’s poster paint) the first night of tech.

It was decided to cut the water and go with a mud:

Here are the actors working with the mud on the second night of tech:

The mud worked much better.

And finally, at the tech table, with light board operator Kenneth, student LD Quinn, and student stage manager Brianna:

Some pictures from shop progress yesterday and today!

Yesterday afternoon, the foam for the slopes was set in place and the two drop elements were hung. This is a view from the booth of the students workings to hang the erosion cloth:

And also from the booth, the legging of the pond platforming:

One of the intro students sands the edge of the pond:

The pond platforming in place. We’ll pull up the lid to install the pond liner, but at least the performers can rehearse with the shape and depth.

I started carving the slopes:

And this is as far as I got by the end of yesterday’s shop session:

This afternoon focus continued. Here’s Alex working with some of the Intro students on some notes before student designer Quinn arrives (he had class):

And here’s Quinn and Intro student Sam laughing about something at the light board:

And Quinn focussing things:

While Quinn focuses, Javonna installs masonite facing strips:

I did a paint test for the wooden columns:

So, here’s Mariah painting the columns:

Action shop shot. TA Katie teaches Intro students how to use the table saw, while TA Lilliana and her crew pull lumber down from the rack:

Lilliana also had her scenic painting marble projects drying in the shop. Here’s one of them. I had her seal half with gloss so she could see shiny marble versus matte marble. I think she did a nice job on this one:

Work continues on “Animal Farm.” We’re reaching the end of hang and getting ready for focus, platforming is going into place, and I hope to begin carving the foam sloped areas later today!

Since the Hicklin is also used for acting classes, all of the rehearsal furniture usually lives there. Since it was time to put the risers in place, here are Intro students Jane and Michael in the midst of moving the rehearsal furniture into the Barnett Theatre.

And then later on, risers in place, with the lighting console brought down from the booth and set up for use during focus:

We’re trying out Jaxsan to texture the surface of the platforming to create a waterproof mud-like surface. I’ve coated a couple of planks to test it out:

And then, after the Jaxsan cured over the weekend, painted the samples:

Speaking of light hang, here’s student ME Emily (with lighting instrument on the left) and some of student electricians:

Here’s the platforming as it was on Friday afternoon at the end of shop:

And Intro student Aaron working on framing more platforming:

And our TD, Ruth, standing in the middle of the pond after more platforming was set in place Monday afternoon: