Does anyone know the part number of the module for the hall sensor to identify further resources? It gives the information on the bags for other parts; however, not the hall sensor.
These hall sensors are all very similar. So, if you google "Arduino hall sensor," you'll find plenty of relevant examples. Note that the 10k resistor that you see in some of the examples isn't needed. Here's one example dataset with pin info: https://asset.conrad.com/media10/add/160267/c1/-/en/001485327DS01/datasheet-1485327-iduino-1485327-hall-effect-sensor-suitable-for-single-board-pcs-arduino-1-pcs.pdf
Their are some modules with an adjustable potentiometer (like this https://arduinomodules.info/ky-024-linear-magnetic-hall-module/ ). Ours is not that type.
Eric
One more thing. The hall sensor board has a tiny LED on it. That doesn't light up when you power the device. It turns on when the hall sensor detects a magnetic field.
Have you gotten the Hall Sensor to work? We are having problems with this sensor. Any suggestions would be much appreciated. Are there libraries that need to be downloaded to our Arduino code? We are fairly sure the wires are correct.
